Alinco DR-620 T/E
Mobile/Base VHF+UHF Transceiver
The front-control panel angle shown on this picture is a part of an option
EDS-9 and not included in DR620 as a standard accessory.
Features of DR-620T/E:
- VHF/UHF operation includes V/U, V/V and U/U modes
(Not capable of full-duplex V/U,V/V,U/U
operation. The sub-band mutes while transmitting on the Main band)
- 200 Memory channels
- H/M/L power output settings- VHF: 50/10/5w UHF: 35/10/5w
- Large alphanumeric display
- Selectable display color illumination
- Internal duplexer - single PL-type antenna connector
- Removable control head can be remote mounted or allow transceiver to be inverted
- Expanded receive range includes FM broadcast band (WFM)
- AM Aircraft band reception and MARS modifiable (T models only)
- Power supply voltage display
- Theft alarm feature
- Optional 1200 and 9600 bps packet operation with optional EJ-50U
- Direct GPS input for APRS mobile tracking (requires optional EJ-50U)
- Digital voice communications with optional EJ-47U (where permitted)
- Optional illuminated DTMF EMS-57 microphone (included with DR-620T) allows direct VFO frequency
entry and remote control of transceiver
- CTCSS & DCS encode and decode plus four different tone bursts
- CTCSS Tone and DCS scan
- Programmable VFO and Memory scan including Timed, Busy and Skip mode.
- "Time Out" timer and Busy-Channel-Lock-Out
- Cable Clone feature
- Temperature Compensated Crystal Oscillator
- Ignition key activated power on/off feature
Optional Accessories
EJ-47U digital modulation board for amateur use *
EJ-50U Internal TNC unit / advanced version
EDS-9 Front-control unit separation kit 5m
EMS-57 Remote-control multi-function microphone (for European version)
* NOT compatible to EJ-40/43U 20F3 digital mode. Please be sure to consult the
rules that apply in your country before you actually operate in the digital mode.
This unit is neither available nor intended for use where the import, sale or use of such devices
is prohibited by the government. Alinco declines any and all responsibilities for any illegal use,
nor is it responsible for sales of our products by dealers to any party.
Specifications
|
Genaral
|
| Frequency range |
| TX: USA | VHF 144-147.995 MHz
UHF 430-449.995 MHz |
| TX: European | VHF 144-145.995 MHz
UHF 430-439.995 MHz |
| RX: USA | 108-173.995 MHz
335-479.995 MHz
87.5-107.995MHz |
| RX: European | 144-144.995 MHz
430-439.995 MHz
87.5-107.995MHz |
|
| Modulation |
16K0F3E(FM)/8K50F3E(Narrow FM)/10F3(digital voice)/F1(9600bps)/F2(1200bps)/A3E(RX only/AM) |
| Channel Steps |
5, 8.33, 10, 12.5, 15, 20, 25, 30, 50, 100 KHz |
| Memory channel |
VHF 80ch / UHF 80ch / Free-programmable 40ch / 1ch VHF CALL / 1ch UHF CALL |
| Ant. impedance |
50 ohm unbalanced |
| Frequency stability |
+/- 2.5 ppm TCXO |
| Power Supply Requirement |
13.8V DC +/- 15% Negative ground |
| Current Drain |
Approx. 11A TX high / 600mA RX max. / 400mA RX squelched |
| Usable temperature range |
-10c to +60c (14F to 140F) |
| Dimensions |
140mm(W) X 40mm(H) X 185mm(D)
5.5 x 1.6 x 7.3 inches |
| Weight |
Approx. 1kg or 35.3oz |
|
Transmitter
|
| Output |
High VHF 50W / UHF 35W, Mid 10W, Low 5W(approx.) |
| Modulation System |
Variable Reactance Frequency Modulation |
| Max.Frequency Deviation |
+/- 5KHz (FM) +/- 2.5KHz (NFM) |
| Sprious emissions |
Less than -60dB |
|
Receiver
|
| Receive system |
Double Conversion Superheterodyne |
| Intermediate Frequencies |
1st 21.7MHz/450KHZ
2nd 45.1MHz/455KHz |
| Sensitivity(-12dB SINAD) |
Main band -14dBu(0.20uV) or better
Sub band -12dBu(0.25uV) or better |
| Squelch |
-18 dBu (0.1uV) or less |
| Selectivity |
FM: -6dB: 12KHz or more, -60dB: 28KHz or less
NFM: -6dB: 6KHz or more, -60dB: 14KHz or less |
| Audio Output |
2W or more (8ohm 10% THD) |
Standard Accessories:
* Microphone (EMS57/EMS53 depending on the version) * DC cable * Bracket * Hardware pack
* ACC port cable * Sticker * Instruction Manual
|
(c) 2002 Alinco,Inc.Osaka,Japan All rights reserved. Although Alinco has designed this page to be as comprehensive and accurate as possible, we reserve the right to make changes at any time to our equipment line, accessories, specifications, or availability of any such device we manufacture and distribute. Please note that certain products and accessories may not be available in all countries of distribution. Please consult your authorized Alinco Dealer for product availability and pricing.
|
|