|
PARTS & SERVICE DEALERS |
Bike, Hike, Walk, TALK!
* Available the CE-certified "E" model only.
Alinco proudly led the way in breakthrough miniature electronics
technology with its revolutionary "credit-card" size transceivers
and receivers. The DJ-C6 is the youngest in the family made
available for those who demand a simple communication tool for
daily-use that fits right in a shirt pocket.STANDARD FEATURES
|
| SPECIFICATIONS |
|
| Frequency TX/RX: |
144.00-145.995MHz, 430.00-439.995MHz |
| Output Power: |
500mW/6Vdc external, 300mW/standard battery EBP-58N |
| Modulation: |
16k0F3E (FM) Receiver Mode: FM |
| Receiver Mode: |
FM |
| Rated voltage: |
3.7Vdc/EBP-58N, 3.7-6.0Vdc external source |
| Current: |
TX 320mA max / RX approx. 70mA (19mA in battery-save mode) |
| Freq.stability: |
- 7- +3ppm Max |
| Deviation: |
+/- 5KHz |
| Spurious: |
Less than -60dB |
| Receiver: |
Double Conv.Superheterodyne |
| IF: |
1st 50.85MHz, 2nd 450KHz |
| Sensitivity (12dB SINAD): |
VHF/UHF hambands -15dBu or less (0.17uV or less) |
| Selectivity: |
+/- 12KHz or more (-6dB), +/- 35KHz or less (-60dB) |
| Audio output: |
90mW or more (8ohm 10%THD) |
| Size (WxHxD w/o projection): |
58 x 96 x 14.5mm or 2.28 x 3.78 x 0.57 inches |
| Weight (antenna & battery inclusive): |
98g or 3.15oz |
| STANDARD ACCESSORIES |
|
|
Lithium ion battery pack EBP-58N (3.7V 600mAh) AC battery quick-charger Whip Antenna * Please be advised that DJ-C6E does not include an antenna-cap that you may see in the standard accessory list on the instruction manual. |
|
| OPTIONAL ACCESSORIES |
|
| EBP-58N |
Lithium ion battery pack (DC3.7V 600mAh) |
| EDC-126(120V)/128(220V) |
AC adapter for charging the battery pack |
| EDH-32 |
Cigarette lighter cable |
| EME-18 |
Earphone |
| EME-24 |
Earphone microphone |
| EME-25 |
Curl-cable earphone |
| EMS-60 |
Speaker microphone |
| ERW-4C |
PC interface cable |
| ESC-38 |
Soft case |
Welcome to DJ-C6E programming software download site.
Please be advised that this is a freeware (copy-right reserved by Alinco, Inc). Although we have tested this software on our Windows 98/ME/2000/XP environments and experienced no serious accident during the operation, we are not responsible of any eventual damage caused to your radio and/or PC system by using this utility. This software enables you to program parameters, edit frequencies and save data in your PC.
DJC6editor (2.47MB)
Please remember that you must have Alinco's optional ERW-4C interface cable in order to connect the unit to the serial port on your PC. The USB connection using a conversion cable may not work properly (depends on the cable you use). If you find bugs please report it to export@alinco.co.jp
[Instruction]
1: Connect the ERW-4C cable to the serial port on your PC then install the software (preferably on the desk-top PC with serial port for ERW-4C connection, some USB conversion plugs may not work well).
2: Operate the software as you like.
3: Turn the radio on with MONI key pressed. A "Clone" sign appears on the screen. Plug in the connector of the ERW-4C to the radio (only after the radio is in the clone mode). After the data transfer (read or write) is complete and the operation is terminated, turn off the radio and remove the cable from the jack.
Turn on the radio to operate it.
4: To delete the software, please use WINDOWS "delete software" in the control-panel.
This software is simple enough therefore please do not ask how to use it. The instruction manual is not available. We strongly recommend you to install the software first, check it and only when you decide that the software is usable then please purchase the ERW-4C cable.
| Main Page |